AR-15 Mil-Spec Buffer Tube Kit Includes:

∙ (1) Mil-Spec Sized 6 Position Buffer Tube
∙ (1) 3 oz. Buffer
∙ (1) Carbine length buffer spring
∙ (1) Standard Receiver End Plate
∙ (1) Castle Nut

Fit the M4 style AR15 carbine buffer tube

∙ Length: 3.375"
∙ Net Weight: 3 oz.
∙ Color: Black
∙ Material: Anodized Aircraft grade aluminum

Carbine Buffer Spring, fits M4 style AR15 carbine buffer tubes

M4-style receiver end plate

Includes the engagement tab required to align the buttstock and buffer tube with the lower receiver on carbine models.

TacFire Official AR15 Castle Locking Nut for .223/5.56 Rifle carbine stock, used to tighten buffer tube to receiver.

∙ Length: 1.375"
∙ Net Weight: 0.5 oz.
∙ Color: Black

Mount a Sling to The Rear of Your AR15 Carbine, For Left or Right Hand Shooters

AR15 ambidextrous Dual Oval loop sling adapter end plate is constructed of Aircraft grade aluminum for strength and durability. It easily installs in…

Our AR15 Mil-Spec buffer tube is made from 6061-T6 Aircraft Grade Aluminum, Matte Black Anodizing with Type III Class II Hard Coat for Best Wear Resistance. It has the tightest tolerance control for Zero-gap fitment with Polymer…

Now You Can Upgrade Your CZ858/VZ.58 With a 6 position Buffer Tube.

Allows installation of M4 style stocks with commercial diameter like Magpul, VLtor, etc.

Made of t6061 aluminum

Sling Attachment End Plate for VZ.58 / CZ858 (Mount for 3 point Sling)
For left and righthand use

Detail Information:

•Most Ingenious Design to Convert AK Stock into Side Folding Retractable Stock•Requires (4217) UTG AK Stock Adaptor for Conversion and Compatible with Most 4-position/6-position Model 4/Model 15…

Detail Information:

•Butt Stock Adaptor Designed For AK and Variants with a Stamped Receiver to Use with Model 4/15 Fixed and Collapsible Stocks•Precision Tolerance for Excellent Bore Alignment•Ergonomically Shaped for…

This buffer is suitable for the Ar15 / M4 with a Carbine buffer tube, also for the Colt Canada C7 and C8 with adjustable stock
Due to the heavier weight, the buffer dampens the recoil, making it easier to control the weapon, but…

The cheek riser / rest on the buttstock is needed when using rifle scope on the SG-550, for a better line of sight. It can be mounted without tools on the original stock.

For right and left shooters
ideal for use with the (1108)…

Tdi-arms SA-M70 is a stationary raised M70 Yugo AK rifle series adapter
allowing the user to change the original wood stock to an M4 collapsible stock.
The SA-M70 is a stand alone adapter that comes with a mounting screw
The…

The TDI-ARMS T-74 (5.5mm) is an adapter for the 5.5mm AK interface.

The T-74 (5.5mm) is made from T6160 aluminum and the tube is mil spec diameter allows the user to
install a collapsible 6 position AR/M4 style stock on your AK…