Our Brass catcher is constructed of Heat Resistant Mesh material that has a capacity of holding up to 60 brass shell casings. It features a convenient zipper at the bottom of the bag for easy emptying and a velcro loop attachment…

Mil-spec lower part kit 21-pcs .
AR-15 Lower Receiver spring replacement kit includes 21 important springs, detents and pins that are commonly replaced or easily lost when building stripped AR-15 lower receivers.The 21-pcs kit…

Ambidextrous Oversized Tac Latch replaces the original factory latch. Featuring large extended Ambi latch levers making it easier to grab. Gives superior leverage for bolt retraction, even on flat top receivers with low-mounted…

• Reversible Short and Long Oversized Levers Finished in a Matte Black Anodization
• Aluminum and Steel Construction
• 45 or 90 Degree Throw Configurable
• Includes Installation Tool and Hardware, Detent, and Detent Spring

Tacfire enhanced AR15 bolt catch.

The large angled bolt catch pad allows for faster bolt catch activation to clear the rifle.
It also contains a wider tooth for more effective magazine follower engagement.

The Ambidextrous Bolt Release lever is an extended lever for the standard AR-15 bolt catch. This lever allows the user to engage and release the bolt catch with the right hand on the pistol grip, or release the bolt catch with the…

Tactical Latch.

Steel tactical latch extends 20.4 mm from the charging handle

Compatible with Colt, Bushmaster, DPMS, Oberland Arms, models AR-10, AR-15, M16, OA15, (Diemaco / Colt Canada) C7, C8

Oversized for quick and easy…

Orginal US-GI
Sold per piece

∙ Net Weight: 0.4 oz.
∙ Color: Black
∙ Material: All Steel Construction

The M4 Carbine Buffer 3OZ is a high-quality buffer for the M4 Carbine.
This buffer is designed to reduce the recoil of the weapon and improve overall stability and accuracy.Weighing in at 3OZ (approximately 85 grams), this buffer…

This buffer is suitable for the Ar15 / M4 with a Carbine buffer tube, also for the Colt Canada C7 and C8 with adjustable stock
Due to the heavier weight, the buffer dampens the recoil, making it easier to control the weapon, but…

Carbine Buffer Spring, fits M4 style AR15 carbine buffer tubes

M4-style receiver end plate

Includes the engagement tab required to align the buttstock and buffer tube with the lower receiver on carbine models.

TacFire Official AR15 Castle Locking Nut for .223/5.56 Rifle carbine stock, used to tighten buffer tube to receiver.

The AR15 Buffer Castle Nut is an essential component for securely securing the buffer tube to an AR15 platform.…

Mount a Sling to The Rear of Your AR15 Carbine, For Left or Right Hand Shooters

AR15 ambidextrous Dual Oval loop sling adapter end plate is constructed of Aircraft grade aluminum for strength and durability. It easily installs in…

Our AR15 Mil-Spec buffer tube is made from 6061-T6 Aircraft Grade Aluminum, Matte Black Anodizing with Type III Class II Hard Coat for Best Wear Resistance. It has the tightest tolerance control for Zero-gap fitment with Polymer…

AR-15 Lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers.

The 9-Piece kit includes springs for:

∙ the bolt catch
∙…

The firing pin retaining pin is made to mil-spec standards for use with AR-15 & M16 bolts and bolt carriers.

The Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 rifles

This kit includes:

Extractor SpringO-Ring (Mil-Spec)Black Extractor Insert

Lower Takedown Pin (Rear) with Pull Ring

∙ Repalces rear takedown pin
∙ Large pull ring for easy removal
∙ Steel Construction
∙ Black Finish

Tacfire AR-15 USA made FRONT take down pin features an extended knurled end with a port for an attachment of a paracord or with ring.

Installing our Tacfire Accu-Wedge underneath the takedown pin lug on the upper receiver,
the "slop" found on many AR-15 rifles can be reduced or eliminated.
Removal of the slop can result in increased accuracy and more reliable…

∙ Length: 1.25"
∙ Net Weight: 0.3 oz.

Tacfire Pivot Pin / Take Down Pin Detent and spring

set contains : 1 Pivot Pin Detent
1 Detent Spring

TacFire Oversized Trigger Guard replaces the original factory trigger guard and provides the shooter with an oversized trigger opening which accommodates the use of gloves in tactical and winter shooting operations.
Features…

Our Gen. 2 extended steel tactical latch charging handle allows the shooter to have a better purchase of the handle when wearing a glove. Latch comes texturized with ridges to enable a better grasp in the event the hands get wet…

This .223/5.56 NATO charging handle allows the operator to lock the bolt open or to chamber a round with 3 different grips. This handle come with the standard finger positioning as well as an extended steel latch on the left for…

This ambidextrous charging handle is revolutionary in design & function.

It allows enhanced operation of the rifle in a variety of shooting positions regardless of dominant hand!

Made from aircraft-grade 7075 aluminum

This drop-in Mil Spec AR15 charging handle has no latch.
Perfect replacement for your standard Ar15 charging handle
This makes it easy to operate your weapon with gloves on or with wet/slippery hands.

Suitable for all Mil-Spec…

Our Gen. 2 extended steel tactical latch charging handle allows the shooter to have a better purchase of the handle when wearing a glove. Latch comes texturized with ridges to enable a better grasp in the event the hands get wet…