(5212) UTG 3-pack .30/.308/7.62Nato Bore Brushes - TL-CLBR308The UTG 3-pack .30 Cal. Bore Brushes are designed to efficiently and effectively clean the barrels of your .308 and 7.62 NATO caliber firearms. These high-quality brushes are essential for maintaining the accuracy and longevity of…
€ 5,99 € 3,00
(5218) AR10 .308 Chamber brush€ 5,75 € 4,00
(5221) AR-15 Chamber Cleaning StarsThe AR requires clean chamber lugs to function properly.
The AR15 Star Chamber Cleaning Pads are therefore essential for removing carbon buildup from the star chamber of an AR15. This set of 20 pads is specially designed to…€ 13,50 € 10,00
(5222) 7.62-Nato/.308 Chamber BrushOriginal US-GI M14 Chamber Brush
NSN: 1005-690-8441 Part No. 7790463
The Original US-GI M14 Chamber Brush is an essential tool for thoroughly cleaning the chamber of your M14 rifle. This brush is designed to military…€ 5,50 € 2,50- (5224) M1 Garand .30-06 Caliber Chamber Brush
his brush is specifically designed for cleaning the chamber of your M1 Garand rifle. The bristles are made of bronze, which is soft enough to not damage the chamber but strong enough to remove stubborn dirt and grime. The brush…
€ 6,99 € 4,00 
(5227) 30-30/308/30-06/7.62mm Cotton Bore MopThis high-quality Cotton Bore Mop is an essential cleaning tool for any shooter who wants to keep their firearms in top condition. Specifically designed for calibers 30-30, 308, 30-06, and 7.62mm, this bore mop ensures thorough…
€ 1,95 € 1,00
(5231) Rifle Cleaning Rope Pull-ThroughThis Rifle Cleaning Rope Pull-Through is an essential tool for any shooter who wants to keep their firearms in top condition. The cleaning rope features an internal thread of 8-32 tpi, making it perfectly compatible with all bore…
€ 3,99 € 3,00
(5236) .20 GA Brush set€ 5,00 € 1,00
(5292) cleaning patches 60 x 50 mm (225pcs)225 cleaning patches "non woven".
60 X 50 mm€ 9,99 € 7,00
(7309) Adaptor for US cleaning rods with 8/32" UNC threadthe VFG Adaptor for US cleaning rods with 8/32" UNC thread (caliber .22 and up):
This cleaning rod adapter is designed to fit existing US cleaning rods with 8/32" UNC thread, such as those from Hoppe’s or Outer. With this…€ 8,99 € 7,00
(7310) VFG felt holder adapterVFG felt holder adaptor for each VFG Cleaning Rod
The VFG adaptors provide the connection between the cleaning rods and the barrel cleaners or superintensive cleaners. The product range includes adaptors for VFG cleaning rods as…€ 8,99 € 7,00
(7318) VFG Barrel Cleaners 7,5mm (.308)The VFG barrel cleaners are made of special felt and are specially designed for normal dirt and oiling or drying of the barrel. The felt cleaner are pre-drilled to fix it exactly centered on the patch holder. For cleaning rifles,…
€ 41,99 € 35,00
(7319S) VFG Barrel Cleaners "Intensive" 7.5mmThese small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.…
€ 12,50 € 10,00
(7400) Hunter Eco Rifle Bag BLKMain compartment for rifle with quilted lining for protection of your rifle.
Suitable for shoulder weapons with a length of up to approximately 122 cm. and maximum height around 22 cm.
On the outside an extra storage compartment…€ 25,00 € 20,00
(8031) AR Lower vise block∙ Allows safe mounting of the lower receiver into a vise
∙ Perfect for cleaning, repair, service, or weapon assembly
∙ Will not crush, distort, mar or damage the receiver
∙ Solvent resistant polymer construction
∙ Lower…€ 19,99 € 15,00
(8032) AR upper vise blockThis vise block allows safe clamping of the upperer receiver into a vise. Perfect for cleaning , service, or weaponry assembly. Used to prevent damage of your firearms receiver.
∙ Allows safe clamping of the upper receiver into…€ 29,99 € 20,00
(8075) Dovetail to Weaver Mount BaseThe Dovetail to weaver mount base attaches to 11 mm dovetail and converts top rail to weaver.
• Black anodized aircraft grade aluminum
• Accepts all standard Weaver / Picatinny 1913 accessories
• Base attaches to 3/8"…€ 24,99 € 16,00
(8126) AR-15 / M4 Carbine Handguard Quad RailThe M4 Carbine Length Drop in Quad Rail is an easy to install upgrade for a basic carbine. Being a two-piece design there is no gunsmithing is required.
∙ Black anodized aircraft grade aluminum
∙ Includes black rubber rail…€ 69,99 € 59,00
