per page
Sort by
  • (1114)  Mauser K98 scout mount
    (1114) Mauser K98 scout mount

    The Mauser K98 Weaver Scope Mount requires no drilling, tapping, or gunsmithing to install on your rifle.

    ∙ Black anodized aircraft grade aluminum
    ∙ Accepts all standard Weaver / Picatinny 1913 accessories
    ∙ Fits most…

    € 24,99
  • (1112) AK-47 / 74 side plate
    (1112) AK-47 / 74 side plate

    AK 47 & 74 Side Dovetail Mount Plate

    ∙ Overall length: 104mm (4.1 inch)
    ∙ Width: 25mm (1 inch)
    ∙ Length (hole to hole) 45mm (1.77 inch) & 31mm (1.22 inch)
    ∙ Through hole diameter: 4.2mm (0.164 inch)
    ∙ Counter hole…

    € 17,50
  • (1105) .30 M1 Carbine Scope Mount
    (1105) .30 M1 Carbine Scope Mount

    The M1 Carbine Mount is compatible with most .30 cal M-1 Carbines and replaces the rear sight

    ∙ Black anodized aircraft grade aluminum
    ∙ Accepts all standard Weaver / Picatinny 1913 accessories
    ∙ Compatible with most .30…

    € 34,99
  • (4204) .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor
    (4204) .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor

    Detail Information:

    •.22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor•Innovative Rail Platform to Convert Most .22/Airgun Rails•Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver…

    € 18,99
  • (1191) Remington 700 long action scope mount 20MOA
    (1191) Remington 700 long action scope mount 20MOA

    Mil-STD-1913 Scope Mount for Remington 700 Long Action 20MOA

    This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances.

    ∙ CNC machined aircraft grade 6061 T6 Aluminum
    ∙ Hard…

    € 35,00
  • (1184) VZ.58 / CZ858 / VZ2000 / VZ2008 receiver side rail
    (1184) VZ.58 / CZ858 / VZ2000 / VZ2008 receiver side rail

    VZ58 CZ585 receiver side rail for mounting AK type mounts on your VZ58, CZ858, CZH 2003 Sport, FSN-01, VZ2000 or VZ2008
    This side rail is designed for The Short optics mount for the VZ58. See article (1111)
    AK type mounts will fit…

    € 45,00
  • (1283) Top & 45 degree Offset riser mount
    (1283) Top & 45 degree Offset riser mount

    Top & Offset Picatinny riser mount, See-through Style, Designed for tactical purposes

    •Angle Mount for Installation on Picatinny Rails
    •See-thru Thirteen-slot Integral Double Rails for Most Versatile Applications
    •Precision…

    € 39,99
  • (1196) Dovetail - Weaver Rail Adapter (11mm - 20mm )
    (1196) Dovetail - Weaver Rail Adapter (11mm - 20mm )

    Specially designed to convert 11mm rail base to 20mm weaver base.

    90mm long.
    12mm elevation.

    € 15,90
  • (9408) Vortex Cantilever 30 mm Ring (37 mm)
    (9408) Vortex Cantilever 30 mm Ring (37 mm)

    The Vortex Cantilever 30 mm Ring (37 mm) is a solid support rifle scope mounting ring for rifle scopes and red dot with a 30mm tube. Due to it's unique design, you can use the cantilever mount to mount a rifle scope on a short…

    € 69,00
  • (9409) Vortex Cantilever Mount 30 mm 2-Inch Offset (1.59 inch/40.39mm)
    (9409) Vortex Cantilever Mount 30 mm 2-Inch Offset (1.59 inch/40.39mm)

    The Vortex Cantilever 30 mm Ring (2-Inch Offset) is a solid support rifle scope mounting ring for rifle scopes and red dot with a 30mm tube. Due to it's unique design, you can use the cantilever mount to mount a rifle scope on a…

    € 179,00
  • (9410) Vortex Cantilever Mount 25,4 mm 2-Inch Offset (1.59 inch/40.39mm)
    (9410) Vortex Cantilever Mount 25,4 mm 2-Inch Offset (1.59 inch/40.39mm)

    The Vortex Cantilever 25,4 mm Ring (2-Inch Offset) is a solid support rifle scope mounting ring for rifle scopes and red dot with a 25,4 mm tube. Due to it's unique design, you can use the cantilever mount to mount a rifle scope…

    € 179,00
  • (9411) Vortex Cantilever Mount 30 mm 3-Inch Offset (1.59 inch/40.39mm)
    (9411) Vortex Cantilever Mount 30 mm 3-Inch Offset (1.59 inch/40.39mm)

    The Vortex Cantilever 30 mm Ring (3-Inch Offset) is a solid support rifle scope mounting ring for rifle scopes and red dot with a 30mm tube. Due to it's unique design, you can use the cantilever mount to mount a rifle scope on a…

    € 179,00
  • (1124) Univeral Barrel Mount
    (1124) Univeral Barrel Mount

    Univeral Barrel Mount

    Made of Aircraft grade Aluminum.

    € 21,99
  • (8074) 45 Degree Offset Picatinny Rail Mount
    (8074) 45 Degree Offset Picatinny Rail Mount

    The 45 Degree Offset Picatinny Rail Mount can be used to mount various accessories, from Red Dots to lasers and flashlights.

    ∙ Black anodized aircraft grade aluminum
    ∙ Accepts all standard Weaver / Picatinny 1913…

    € 22,50
  • (1281) Tactical Dual 45° Offset Picatinny Rail Mount
    (1281) Tactical Dual 45° Offset Picatinny Rail Mount

    ∙ Length: 65mm (2.5 inch)
    ∙ Overall Width: 63.5mm (2.5 inch)
    ∙ Weight (net): 92g (3.2 ounce)
    ∙ Fits on standard picatinny rail (installed effect as following shown).
    ∙ Release the two top screws, slide this mount onto…

    € 26,99
  • (1195) 1 inch ful size Picatinny riser mount
    (1195) 1 inch ful size Picatinny riser mount

    Enhance your optical capabilities with the Hi-profile Full Size Riser Mount.

    This riser mount raises your scope by 1 inch, providing you with a better eye height and a more comfortable shooting position. The mount features 14…

    € 23,00
  • (1104) UTG M14 / M1A / M305 Scope mount
    (1104) UTG M14 / M1A / M305 Scope mount

    UTG New Gen 4-Point Locking Deluxe M14/M1A /M305 Scope Mount

    •New Gen Mil-spec Quality Deluxe Sniper Mount for M-14 / M1A / M-305 Rifles
    •Over 6" Fully Picatinny-complied 15-slotted Top Rail with the Rear End Locks into the…

    € 63,50
  • (1115) Ruger 10/22 scope mount
    (1115) Ruger 10/22 scope mount

    •4.7" Long Picatinny Rail with 11 Slots for Convenient Scope Eye Relief Adjustments
    •Bottom with Contour Perfect Fitting the Receiver
    •Complete with 5 Screws for Fast Installation

    € 26,99
  • (4225) G36 Picatinny Rail set short
    (4225) G36 Picatinny Rail set short

    Detail Information:

    •Three 98mm long Picatinny Rails Each with 7 Numbered Slots•2 Screw Holes on Each Rail•Complete with 6 Hex Screws

    € 26,00
  • (4240) UTG Super Slim Picatinny Riser Mount, 0.75" Height, 13 Slots
    (4240) UTG Super Slim Picatinny Riser Mount, 0.75" Height, 13 Slots

    Detail Information:

    • UTG Super Slim Picatinny Riser Mount, 0.75" Saddle Height, 13 Slots, 5.5" in Length• A Fresh New Look Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodize•…

    € 54,99
  • (4239) UTG 5-Slot QD Lever Mount Adaptor and Riser, Medium Profile
    (4239) UTG 5-Slot QD Lever Mount Adaptor and Riser, Medium Profile

    Detail Information:

    •Most Versatile for Use as QD Riser•Immediate Conversion of Any Non-QD Mount Accessories to QD Deployment•Made from Aircraft Aluminum with Matte Anodizing
    Material: Aluminum
    Weight: 3 oz
    Pieces: 1
    Rail…

    € 39,99
  • (4238) UTG AK47 19-Slot Low-pro Picatinny Rail w/QD & Rear Sight
    (4238) UTG AK47 19-Slot Low-pro Picatinny Rail w/QD & Rear Sight

    Detail Information:

    • Fits with Romanian, Chinese, U.S. AKs and also Saigas with Rear Sight Blade and Fixed Buttstock• Innovative 3-point Modular and Adjustable Locking System for Optimal Low Profile and Most Secure Fit•…

  • (1311) Mounting screws 6-48 x 0.24" Torx 4 pcs.
    (1311) Mounting screws 6-48 x 0.24" Torx 4 pcs.

    Mounting screws Trox 6-48 x 0.24”
    For mounting a weaver / picatinny rail on the receiver of your weapon, Ideal as spare screws to replace defective or missing screws.Technical Information:

    - 6-48 Torx T15 Screws
    - Thread Length…

    € 3,99
  • (3260) BackCountry Cross-Slot Savage 10 RND RCVR SA 1-pc 20 MOA Matte
    (3260) BackCountry Cross-Slot Savage 10 RND RCVR SA 1-pc 20 MOA Matte

    BackCountry cross-slot bases are machined from 7075-T6 aircraft-grade aluminum for lightweight, rugged performance.
    Fits both Picatinny and Weaver-style rings.
    Available with zero elevation or 20-MOA for long-range shooting.

    € 75,00 € 65,00
  • (1187) High profile Sig 55X 550, 551, 552 scope mount
    (1187) High profile Sig 55X 550, 551, 552 scope mount

    High Profile Mil-STD-1913 Picatinny Scope Mount for SIG 550, 551, 552, 553, STGW 90, PE 90

    ∙ CNC machined Aluminum mount
    ∙ Hard Anodized coating
    ∙ Recoil resistant
    ∙ Easy installation no gun smith required
    ∙ Designed…

    € 135,00
  • (1353) Repro mounting screws for Lee Enfield No. 32 mounting pads
    (1353) Repro mounting screws for Lee Enfield No. 32 mounting pads

    Repro Mounting Screws for Lee Enfield No. 32 scope mount

    Screws are M3x10 slotted, color may vary as they are colored with period correct bronzing fluid Ideal as spare screws or to replace defective or missing screws. Suitable…

    € 7,50
  • (1352) Correct BA Mounting screws  for Lee Enfield No. 32 mounting pads
    (1352) Correct BA Mounting screws for Lee Enfield No. 32 mounting pads

    Mounting Screws for Lee Enfield No. 32 scope mount (post WWII production)

    Screws are 4BA with slot
    Ideal as spare screws or to replace defective or missing mounting screws from the original Lee Enfield No. 4 T
    Suitable for the…

    € 10,00
  • (5040) Mil-Spec Thread locker 5g
    (5040) Mil-Spec Thread locker 5g

    Military grade thread locker. Eliminates screw and nuts loosening.
    Firm to the touch after about 2 to 10 minutes, final strength achieved after approximately 12 hours.Ideal for securing rifle scope mounts, Quad Rails, Muzzle…

    € 8,50
  • (4242) Remington 700 short action 0MOA picatinny rail
    (4242) Remington 700 short action 0MOA picatinny rail

    Robust Steel Const Picatuinny rail 0 MOA

    Material: Steel
    Weight: 4.3 oz
    Pieces: 1
    Rail Type: Picatinny/Weaver
    No. of Rails: 1
    Length: 5.47 inch
    Fits Remington 700 short action rifle, with righthand bolt

    Rem 700 Short Action…

    € 29,99
  • (9430)  OEM Cantilever mount 30mm 2-Inch Offset (1.59 inch/40.39mm)
    (9430) OEM Cantilever mount 30mm 2-Inch Offset (1.59 inch/40.39mm)

    The OEM Cantilever 30 mm Ring (2-Inch Offset) is a solid support rifle scope mounting ring for rifle scopes and red dot with a 30mm tube.

    Due to it's unique design, you can use the cantilever mount to mount a rifle scope on a…

    € 49,00
    31 - 60 van 69 resultaten
© 2009 - 2024 ShootingSportsSupplies.com | sitemap | rss | ecommerce software - powered by MyOnlineStore